<address id="lrp7j"></address>

                    <address id="lrp7j"><listing id="lrp7j"><menuitem id="lrp7j"></menuitem></listing></address>
                    News Dynamic
                    company culture
                    see more>>
                    Factory view
                    Company Profile
                    see more>>
                    After sales service
                    see more>>
                    current locationHome >> News Dynamic >> Industry NewsIndustry News
                    Selection and maintenance method of vertical pipeline centrifugal pump
                    release2016-12-09 13:55:50  Views

                           Vertical pipeline centrifugal pump is one of the widely used pipeline booster pumps. Because of its small size, it does not take up space and is easy to install, it is mostly used in construction, water supply, fire protection and other aspects. The selection basis of vertical pipeline centrifugal pumps should be considered from five aspects according to the process flow, water supply and drainage requirements, namely the liquid delivery volume, device lift, liquid properties, pipeline layout, and operating conditions.

                           1. Liquid properties, including the name of the liquid medium, physical properties, chemical properties and other properties. The physical properties include temperature c density d, viscosity u, solid particle diameter and gas content in the medium, etc. This involves the system head, effective gas Erosion calculation and suitable pump type: Chemical properties, mainly refers to the chemical corrosivity and toxicity of the liquid medium, is an important basis for the selection of pump materials and which type of shaft seal.

                           2. Flow is one of the important performance data of the vertical pipeline centrifugal pump, which directly affects the production capacity and conveying capacity of the entire device. For example, the design flow of the pump can be calculated in the design process of the design institute. When selecting a pump, take the peak flow as the basis and take into account the normal flow. When there is no required flow, usually 1.1 times the normal flow can be taken as the use flow.

                           3. The piping layout conditions of the device system refer to the liquid delivery height, liquid delivery distance, and liquid delivery direction. Some data such as suction side low liquid level, discharge side high liquid level, and pipe specifications and their lengths, materials, pipe specifications, and quantities And so on, in order to perform head calculation and check of cavitation allowance.

                           4. The head required by the device system is another important performance data for pump selection. Generally, the head is selected by enlarging the 5% -10% margin.

                           5. There are many contents of operating conditions, such as liquid operation T saturated steam force P, suction side pressure PS, discharge side container pressure PZ, altitude, ambient temperature operation is gap or continuous, and the position of the pump is fixed or possible. Shifted.

                    Maintenance of vertical pipeline centrifugal pump:

                           It should be checked frequently for smoothness, wear and leakage of mechanical seals, and seals should be replaced in time to prevent pressure water from entering the motor.

                           Always check the inlet pond for floating objects and changes in water level. If the inlet sink drops below a certain level, the pump should stop running to avoid cavitation and damage to the impeller. If necessary, the gate valve can be adjusted to appropriately reduce the water output of the pump and promote the rise of the water level in the pool. Pay attention to the changes of the pressure gauge and ammeter, find abnormalities, and take corresponding measures in time. When the pump is out of service for a long time, drain off the accumulated water, remove rust, and apply anti-rust grease.

                           Always check the temperature change of the motor casing, the pump is running normally, the temperature rise of the motor is allowed to reach 80 C, and if necessary, the motor current must be further checked for overload and three-phase current imbalance.


                    online service




                            <address id="lrp7j"></address>

                                      <address id="lrp7j"><listing id="lrp7j"><menuitem id="lrp7j"></menuitem></listing></address>